Varilight JFSP401, V-Pro Series, 1 Gang, 1 or 2 Way, Push-On/Off Rotary LED Dimmer 1 x 0-120W (1-10 LEDs), Ultra Flat Brushed Steel

Varilight JFSP401, V-Pro Series, 1 Gang, 1 or 2 Way, Push-On/Off Rotary LED Dimmer 1 x 0-120W (1-10 LEDs), Ultra Flat Brushed Steel

#JFSP401
£16.75 (ex. VAT)
£20.10 (inc. VAT)
Quantity  
Free Delivery on all orders over 100 GBP



  •    Description
  •    Specs
  •    Reviews
  •    Q & A (0)
  •    Shipping & Returns
The V-Pro series comprises programmable intelligent dimmers with a choice of dimming modes for wider compatibility. All V-Pro dimmers offer superior dimming technology to deliver the best possible dimming performance for a given load. V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change between three driving modes and adjust the minimum brightness to suit your installation.

This dimmer is designed to control LED lighting loads requiring trailing-edge or leading-edge control with options from 0W-120W (max. 10 LEDs)

V-Pro series dimmers are designed for use with LEDs and work with the majority of dimmable LEDs on the market. They are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting.


These Dimmers can be used in 2-way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2-way switching, they must be paired with a standard 2-way switch in the other location. 3-way switching can also be achieved by adding an intermediate switch into the circuit. Please note, if total dimming is preferred from all switched locations, in a 2 or 3-way circuit then choose the Varilight Touch and Remote Series range of dimmers, or the Eclique range (if dimming LEDs) in conjunction with Slave Dimmers. The V-Pro Dimmers have a soft start feature and intelligent overload protection.

These dimmers do not work with lighting panels (LED or CFL).

Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. As a rule, buy the V-Pro dimmers and LEDs from us to make sure they are compatible.

We only sell products that have the latest software installed. our PDF instruction manuals refer to the product that is being sold.

-Fits in a 35mm Deep Wall Box

-Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes. With the V-Pro series, you are, able to adjust the minimum brightness setting.

-The Best Dimmer For Most Good Quality Dimmable LEDs.

-To clean product, we recommend only using a microfibre cloth.
Product Description: 1-Gang 2-Way Push-On/Off Rotary LED Dimmer 1 x 0-120W (1-10 LEDs)


Range: Ultraflat

Finish: Brushed Steel

Product Category: V-Pro Dimmer

Insert/Knob Colour: Steel Knob

Barcode: 5021575621068


Dimensions: 89x89x47mm

Faceplate Depth: 1mm

Product Weight: 160g

Fixing Centres: 60.3mm

Recommended Back Box Depth: 35mm

Operating Voltage: 220/250V AC

Maximum Load Rating: LED; 120W (Halogen; 300W, Mixed Loads; 120W) (Max. 10 lamps for all lighting types)

Maximum Current Rating: 1.3A

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1

Commodity Code: 85365007

There are currently no any reviews about this product.

There are currently no any question about this product.

WHERE IS MY ORDER SENT FROM?

All orders are packed & shipped from our HQ in West Sussex the same day you order, if in stock and ordered before 12pm GMT Monday to Friday. That's just how we like to roll!

Customers who bought this product also purchased...
HFS43 Varilight V-Dim Series 3 Gang, 1 or 2 Way 3 x250 Watt Dimmer, Ultra Flat Brushed Steel

HFS43 Varilight V-Dim Series 3 Gang, 1 or 2 Way 3 x250 Watt Dimmer, Ultra Flat Brushed Steel

THESE DIMMERS WILL NOT DIM LEDs.3 Gang (Triple), 1 or 2 Way...
£28.83 (ex. VAT)
£34.60 (inc. VAT)
Z2GHBB Varilight Half Blank Module in Black. Use with Varilight Data Grid Plates

Z2GHBB Varilight Half Blank Module in Black. Use with Varilight Data Grid Plates

Half Blank Module in Black. Use with Data Grid Plates...
£0.33 (ex. VAT)
£0.40 (inc. VAT)
Z2GRJ456B For Cat6 network applications. Use with Varilight Data Grid Plates

Z2GRJ456B For Cat6 network applications. Use with Varilight Data Grid Plates

For Cat6 network applications. Use with Data Grid Plates ...
£5.33 (ex. VAT)
£6.40 (inc. VAT)
XFSDB Varilight 2 Gang (Double), Blank Plate, Ultra Flat Brushed Steel (Double Plate)

XFSDB Varilight 2 Gang (Double), Blank Plate, Ultra Flat Brushed Steel (Double Plate)

2 Gang (Double), Blank Plate, Ultra Flat Brushed Steel ...
£5.08 (ex. VAT)
£6.10 (inc. VAT)
GP400S [Z0GP400S-O] Varilight 1 or 2 Way 400W Power Grid Dimmer Brushed Steel

GP400S [Z0GP400S-O] Varilight 1 or 2 Way 400W Power Grid Dimmer Brushed Steel

THESE DIMMERS WILL NOT DIM LEDs.1 or 2 Way 400W Power Grid...
£8.67 (ex. VAT)
£10.40 (inc. VAT)
PGRIDBOX6-8 (WA512) Metal 47mm Deep Wall Box (Knock-out) For 6 or 8 Gang Power Grid Plates

PGRIDBOX6-8 (WA512) Metal 47mm Deep Wall Box (Knock-out) For 6 or 8 Gang Power Grid Plates

Metal 47mm Deep Wall Box (Knock-out) For 6 or 8 Gang Power...
£12.08 (ex. VAT)
£14.50 (inc. VAT)

Ask a question about the Varilight JFSP401, V-Pro Series, 1 Gang, 1 or 2 Way, Push-On/Off Rotary LED Dimmer 1 x 0-120W (1-10 LEDs), Ultra Flat Brushed Steel





top ↑