2 Gang (Double) 1 or 2 Way 2x400 Watt (Trailing Edge) Dimmer, Classic Brushed Steel (also known as Classic Matt Chrome) (Double Plate)
Varilight V-Pro Series Classic Brushed Steel (also known as Classic Matt Chrome), 2 Gang (Double) 1 or 2 Way 2x400 Watt Push on/Push off (Trailing Edge, but this can now be adjusted to Leading Edge.) Dimmer with Brushed Steel Knobs. Eliminate Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads
VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
The VARILIGHT V-Pro (Professional Universal) Series Dimmer (also known as the J-Pot Dimmer), like all our products, is designed to meet the latest European Safety Legislation.
The V-Pro Series were primarily designed for Dimmable LED's, the dimmers, with a minimum load of only 10 Watts, can operate at least 1-10 good quality Dimmable LED's.
These Dimmers can also be used to operate upto 8 Varilight (YCA20D) or Megaman Dimmable Energy Saving Lamps, (Please refer to the instruction leaflet of the Megaman lamps for usage tips).
When using Electronic Low Voltage transformers we recommend that a maximum of 5 good quality dimmable electronic transformers are used (10 if Varilight) with this Dimmer range. Please note: add the watts of the bulbs/lamps if using Varilight Transformers, to determine which dimmer to select, but if using another manufacturer of transformer, add up the VA of the transformers so it does not exceed the maximum of the dimmer.
The V-Pro Series Dimmers can also be used for mains incandescent GLS lamps (standard mains light bulbs up to the maximum load as specified on the dimmer.) If dimming GU10 Lamps or similar Hi Spot Mains Halogen lamps, (only use quality UK supplied lamps), please see the Compatibility guide or instruction PDF found in "Specs & PDF's", or the instruction leaflet included with the dimmer.
The V-Pro Series Dimmer can NOT be used for wire-wound Low Voltage transformers, Fans or inductive loads.
These V-Pro dimmers are Trailing Edge by default, but this can be adjusted to Leading Edge, please see instructions provided with the dimmer or the PDF instuctions in "Specs and PDFs" on this product page.
These Dimmers can be used in 2-way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2-way switching, they must be paired with a standard 2-way switch in the other location. 3-way switching can also be achieved by adding an intermediate switch in to the circuit. Please note, if total dimming is preferred from all switched locations, in a 2 or 3-way circuit then choose the Varilight Touch and Remote Series range of dimmers, or the Eclique range (if dimming LEDs) in conjunction with Slave Dimmers.
This Dimmer has a maximum of 400 Watts per dimming module (100 Watts for LEDs) and a minimum of 10 Watts
The V-Pro dimmers have had numerous software updates since it's existence, mainly to improve LED stability but also to add ingenious functions too. For instance, the V-Pro dimmers are set to a certain level of brightness when first wired up and switched on, the dimmer brightness can now be changed if the LEDs are too bright at the lowest dimmer level; Again please see the instructions for details.
These dimmers do not work with lighting panels (LED or CFL).
Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so can not be returned, but a better quality LED lamp/bulb should be fitted instead. As a rule, buy the V-Pro dimmers and LEDs from us to make sure all is compatible.
We only sell products that have the latest software updates, our PDF instruction manuals refer to the product that is being sold.
-Max Load 400 Watt (100W if using LEDs)
-Min Load 10 Watt
-Fits in a 25mm Deep Wall Box
-Trailing and Leading Edge Dimmer, refer to instructions provided with the dimmer, to allow switching between the 2 modes.
-The Best Dimmer For Most Good Quality Dimmable LED's.
-To clean product we recommend only using a microfibre cloth.
-V-Pro Push Dimmer Instructions 761 PDF
-Compatibility 2013 PDF