Varilight V-Pro MJP120, also known as Z0JP250-P, 1 or 2-Way Push-on Push-off LED Replacement Dimmer Module Kit 1 x 0-120W (1-10 LEDs)
VARILIGHT Modules have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
The VARILIGHT V-Pro Series Module (also known as the J-Pot Module), like all our products, is designed to meet the latest European Safety Legislation.
The V-Pro Series were primarily designed for Dimmable LED's. The Modules (with a minimum load of 0 Watts) can operate 1-10 good quality Dimmable LEDs.
These V-Pro modules are Trailing Edge by default, but this can be adjusted to Leading Edge. Please see instructions provided with the module, or the PDF instuctions in "Specs and PDFs" on this product page.
These modules can be used in 2-way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2-way switching, they must be paired with a standard 2-way switch in the other location. 3-way switching can also be achieved by adding an intermediate switch in to the circuit. Please note, if total dimming is preferred from all switched locations, in a 2 or 3-way circuit then choose the Varilight Touch and Remote Series range of dimmers, or the Eclique 2 range (if dimming LEDs) in conjunction with Slave Dimmers.
This module has a maximum dimmable LED load of 10 lamps (up to a total wattage 120 Watts) per dimming module and a minimum of 0 Watts
The V-Pro modules have had numerous software updates since their release, mainly to improve LED stability, but also to add ingenious functions too. For instance, the V-Pro Modules are set to a certain level of brightness when first wired up and switched on, however the minimum brightness can be adjusted. Please see the instructions for details.
These modules do not work with lighting panels (LED or CFL).
Please note that only good quality dimmable LEDs should be used, like Megaman. If this Module is purchased and the LED lamps are not compatible, the Module is not faulty so can not be returned, but a better quality LED lamp/bulb should be fitted instead. As a rule, buy the V-Pro dimmers and LEDs from us to make sure all is compatible.
We only sell products that have the latest software updates, our PDF instruction manuals refer to the product that is being sold.
-Max Load 120W for LEDs
-Min Load 0 Watt
-Fits in a 25mm Deep Wall Box depending on the plate it is attatched to
-Trailing and Leading Edge Module, refer to instructions provided with the Module, to allow switching between the 2 modes.
-The Best Module For Most Good Quality Dimmable LED's, like Megaman.
-V-Pro Push Dimmer Instructions 761 PDF
-Compatibility 2013 PDF