Z0FP1S1-P Dimmer Module Designed Only for One High Frequency Dimmable Ballast that Require a 0-10V (or 1-10V) Control Signal. Varilight Dimmer Module Designed Only for One High Frequency Dimmable Ballast that Require a 0-10V (or 1-10V) Control Signal, and should not be more than 0.5mA. 1 dimmer per dimmable ballast, If dimming 2 or more ballasts then please choose Z0FPM1S1. VARILIGHT Dimmer Modules have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
The VARILIGHT Ballast Dimming module, like all our products, is designed to meet the latest European Safety Legislation.
The Z0FP1S1-P is designed for one high frequency dimmable ballast that require a 0-10V or 1-10V control signal.
This dimmer Module is designed to work with one dimmable ballast, and is suitable for 1, 0.2mA dimmable ballast (e.g. Philips HF-R) or 1, 0.5mA dimmable ballast (e.g. GE LFL UltraMax). If dimming 2 or more ballasts then please choose Z0FPM1S1.
Do not use this dimmerswitch for any other purpose or connect this dimmer to the mains, as your guarantee will be invalid.
Please see Varilight's recommendation of maximum loads in the Compatibility guide PDF found in "Specs & PDF's"-Height (mm):85
-For One Dimmable Ballast that Require 0-10V or 1-10V Control Signal
-Do Not Use This Dimmer For Any Other Purpose
-Fits in a 25mm Deep Wall Box
-Current From 1-10V Control Signal Should Not Be More Than 0.5mA
-Ballast Dimmer PDF
-Compatibility 2013 PDF