YTACDC Varilight - AC/DC Converter for 12V d.c LED Strips and Lamps.

YTACDC Varilight - AC/DC Converter for 12V d.c LED Strips and Lamps.

#YTACDC
£14.50
£13.05 (ex. VAT)
£15.66 (inc. VAT)
Earn 15 Reward Points when you buy this item
Quantity  
Free Delivery on all orders over 100 GBP



  •    Description
  •    Reviews
  •    Q & A (0)
  •    Shipping & Returns
YTACDC [YTACDC12] AC/DC Converter for 12V d.c LED Strips and Lamps

Varilight - AC/DC Converter for 12V d.c LED Strips and Lamps. This LED Driver is supplied with electrical leads for ease of installation.

Use one AC/DC converter with each VARILIGHT 50W (YT50LZ), 70W (YT70LZ) and 105W (YT105Z) low voltage transformer to power either 12V d.c. LED Strips (or 12V d.c. LED Lamps). More than one AC/DC converter can also be connected in parallel to VARILIGHT transformers with a rating of 150W or higher as long as there is a uniform load per converter.

Please see YTACDC12 Driver instructions "Recommended Loads" found in 'specs & pdfs' underneath the image, for recommended loads.

Dimming LED Strips

Choose VARILIGHT V-Pro dimmers to dim LED strip lighting. Refer to the maximum load information for low voltage transformers provided with the dimmer to determine the maximum permitted load (measured by the total wattage of transformers to be connected) and, in any case, do not exceed 250W per dimmer circuit.


LED Strip Installation:

To power 12V d.c. LED strips use a VARILIGHT transformer with one or more AC/DC converters (see Recommended Load information in 'specs & pdf's'.)
The number of VARILIGHT transformers and AC/DC converters should be matched to the power of LED strips you want to connect as in the instruction table.
The maximum single length LED strip you can power from each AC/DC converter is 5 metres.

It is possible to power several lengths from one AC/DC converter as long as the total load is less than 50W by connecting the LED strips in parallel (see Fig. 1 and Fig. 2 in instructions for possible configurations)

Specification:

Input voltage:
11.5 V a.c. +/-10%. 0-35 kHz

Input current:
? 4.5 A

Output voltage:
11.1 V d.c. +/- 10%

Rated power:
50 W

Nominal output current:
? 4.5 A

Output current range:
0 - 4.5 A

Protection degree:
IP20

Ambient temperature Ta:
max. 40 C

Case temperature Tc:
max. 75 C

Dimensions:
72 x 36 x 26 mm

Input wires:
min. 2 x 1.0 mm2

Output wires:
min. 2 x 1.0 mm2



-Height (mm):70

-Width(mm):35

-Depth(mm):25

-Fully tested and Certified

-Can also be used with Dimmable 12v d.c. LEDs

-For Indoor Use Only

-More than one AC/DC converter can also be connected in parallel to VARILIGHT transformers with a rating of 150W or higher as long as there is a uniform load per converter.

-Typically used for 12 Volt d.c. LED Strips
-VARILIGHT ACDC Converter Instructions PDF

There are currently no any reviews about this product.

There are currently no any question about this product.

WHERE IS MY ORDER SENT FROM?

All orders are packed & shipped from our HQ in West Sussex the same day you order, if in stock and ordered before 12pm GMT Monday to Friday. That's just how we like to roll!



Recommended Products
MARK LIGHTING 6W Dimmable GLS B22

MARK LIGHTING 6W Dimmable GLS B22

£6.67 (ex. VAT)
£8.00 (inc. VAT)
MARK LIGHTING 6W Dimmable GLS E27

MARK LIGHTING 6W Dimmable GLS E27

£6.67 (ex. VAT)
£8.00 (inc. VAT)

Ask a question about the YTACDC Varilight - AC/DC Converter for 12V d.c LED Strips and Lamps.





top ↑