2 Gang (Double), 1 or 2 Way or Multi-way 2 x 100 Watt (i.e. 100 Watts per dimming module, 1-10 LEDs) IJ LED Only Touch/Remote V-Pro IR Master Dimmer, (Trailing Edge), Dimension Screwless Brushed BrassVarilight Dimension Screwless Brass, 2 Gang (Double), 1 Way (or multi-way if used with slave dimmer), 100 Watt LED Only Touch/Remote V-Pro IR Master Dimmer, with Trailing Edge Technology, (This Dimmer Must ONLY Be Used for LED Lighting)VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices. This VARILIGHT IJ LED Touch and Remote Dimmer V-Pro IR Series has many more advanced features than other normal Trailing Edge dimmer switches: the lights can be dimmed from any location, (if used with a Slave dimmer), rather than only from the dimmer location.
Like all our products the IJ LED Touch and Remote Dimmer Series are designed to meet the latest European Safety Legislation.
Touch these dimmers to dim, or alternatively use a remote control.
The dimmers are easily programmable so it is possible to dim your lights with a spare button on an existing remote control, for example a Sky or TV remote. Instructions on how to achieve this are included with the dimmer. If more than one Touch and Remote Dimmer is being used, the optional Varilight 8-channel Remote Control is available (product code YRC8 or scene setting remote control: YRE8).
The IJ LED Touch and Remote dimmer is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the LED lamps are accidentally too high on a circuit. This is achieved by the dimmer cutting out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. This Touch and Remote dimmer series also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot.
The IJ LED Touch and Remote Dimmer Series has Soft Start Technology, allowing a longer life span of the LED lamps used by increasing the brightness level softly, which also creates a welcoming effect.
IJ LED Touch and Remote Dimmers can be used in 1-way, 2-way, 3-way or even multi-way circuits. When using the IJ LED Touch Remote Dimmers in 2-way circuits or more, they should be used with Slave Dimmers in the other switch locations. In every circuit there should be only one IJ LED Touch and Remote Master Dimmer, and then any number of Slave Dimmers, either use normal or Eclique Varilight Slaves. This IJ LED Touch and Remote Series can be used where there is conventional two-way or multi-way wiring.
The IJ LED Touch and Remote Dimmer Series can be used for good quality LEDs. Good quality Dimmable Electronic Transformers with MR16 LEDs can also be dimmed using this dimmer, please note that noise levels can depend on the quality of the Transformer being used. For best results buy Varilight's Dimmable Electronic Transformers.
When using Electronic Low Voltage Transformers we recommend that a maximum of 5 good quality dimmable Electronic Transformers are used (10 if Varilight) with this Dimmer range. Please note: add the watts of the LED lamps if using Varilight Transformers, to determine which dimmer to select, but if using another manufacturer of Transformer, add up the VA of the Transformers so it does not exceed the maximum of the dimmer.
Choose the IJ LED, V-Pro or V-Pro Eclique Dimmer Series if dimming LED's.
This Dimmer has a maximum of 100 Watts for LEDs only and minimum of 10 Watts per dimming module
-Max Load 100 Watt (1-10 LEDs)
-Min Load 10 Watt
-For LEDs ONLY
-Fits in a 25mm Deep Wall Box
-Controlled By the Infrared Remote Handsets: YRC8 or YRE8 (The YRE8 has scene setting functions) - not included
-Trailing Edge Dimmer out of the box, but can be adjusted as there are 3 different dimming modes, choose the best dimming mode for your LEDs
-Soft Start Technology Allows a Longer Lifespan of LED Lamps
-To clean product we recommend only using a microfibre cloth.
-IJ Remote PDF
-Compatibility 2013 PDF