Varilight, V-Com series comprises of programmable intelligent dimmers, which have a push-on/push-off switch action with rotary dimming. All V-Com dimmers offer smooth LED dimming technology to deliver the best possible dimming performance for a given load. V-Com dimmers are designed to control LED lighting loads requiring leading-edge (triac).
There is a choice of driving modes to optimise the dimming performance of any given LED lighting load. V-Com dimmers feature Varilight's new DRIVE function to aid initial start-up for lamps that otherwise will not switch on at low brightness settings. This feature, alongside adjustable minimum and maximum brightness settings, enable V-Com dimmers to provide the full range of brightness that a given LED lamp is capable of delivering. V-Com dimmers also have a soft-start feature and intelligent overload protection to improve the life span of both the LED lamps and the dimmer. With its patented intelligent LED dimming technology, V-Com is Varilight's best value range for LED dimming.
Users can set the minimum and maximum load level for the dimmer to optimise the dimming range of a lighting load.
Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better-quality LED lamp/bulb should be fitted instead. As a rule, buy the LED dimmers and LEDs from us to make sure they are compatible.
We only sell products that have the latest software installed. To clean product, we recommend only using a microfibre cloth.
1-Gang 2-Way Push-On/Off Rotary LED Dimmer 1 x 40-600W (max 60 LEDs) (Twin Plate)
Product Category: V-Com Dimmer
Insert/Knob Colour: Iridium Knob
Faceplate Depth: 8mm
Product Weight: 400g
Fixing Centres: 120.6mm
Recommended Back Box Depth: 25mm
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 600W (Halogen; 600W)
Maximum Current Rating: 2.6A
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²Intended Applications:
Indoor Use Only. Commercial & domestic lighting circuits including many dimmable LEDS.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.
Applicable Safety Standard: BS EN 60669-2-1
There are currently no any reviews about this product.
There are currently no any question about this product.
WHERE IS MY ORDER SENT FROM?
All orders are packed & shipped from our HQ in West Sussex the same day you order, if in stock and ordered before 12pm GMT Monday to Friday. That's just how we like to roll!