Multi-Grid Dimmer Module, 1 or 2 way, Designed for one or more High Frequency Dimmable Ballasts that Require a 0-10V (or 1-10V) Control Signal, up to 20 mA for the MK, Schneider/GET, and Crabtree Power Grid Range
This Power Grid module has all the same ingenuity as the rest of the Varilight V-Pro Series LED Dimmers, in addition this module has been re-designed to fit into any MK, Schneider/GET, and Crabtree Power Grid. The GFP1M1W.MG can be used in a 1 or 2 Way circuit, it controls one or more High Frequency Dimmable Ballasts that Require a 0-10V (or 1-10V) Control Signal, up to 20 mA, it has a Push on/Push off action.
VARILIGHT Dimmers have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
The VARILIGHT Ballast Dimmers, like all our products, are designed to meet the latest European Safety Legislation.
This dimmer is designed for one or more high frequency dimmable ballasts that require a 0-10V or 1-10V control signal.
This dimmer is designed to work with one or more dimmable ballasts, upto 20mA dimmable ballasts (e.g. Philips HF-R) or (e.g. GE LFL UltraMax).
Do not use this dimmerswitch for any other purpose or connect this dimmer to the mains, as your guarantee will be invalid.
Please see Varilight's recommendation of maximum loads in the Compatibility guide PDF found in "Specs & PDF's"
-For One or more Dimmable Ballasts that Require 0-10V or 1-10V Control Signal
-Do Not Use This Dimmer For Any Other Purpose
-Fits in a 35mm Deep Wall Box
-Current From 1-10V Control Signal Should Not Be More Than 20mA
-To clean product we recommend only using a microfibre cloth.
-Ballast Dimmer PDF
-Compatibility 2013 PDF