FIFPMS1C-SP 1 Gang (Single) 1 or 2 Way Dimmer Designed Only for High Frequency Dimmable Ballasts that Require a 0-10V (or 1-10V) Control Signal, Dimension Screwless Freestyle
Varilight 1 Gang (Single) 1 or 2 Way Dimmer Designed Only for High Frequency Dimmable Ballasts that Require a 0-10V (or 1-10V) Control Signal, and should not be more than 0.5mA. For best results 1 dimmer per dimmable ballast, but this dimmer will give satisfactory results for 2 ballasts in some circumstances, see more info, for extra advice. Dimension Screwless Freestyle with a Polished hrome knob. Please Note: This is a bespoke item so can only be returned if faulty!VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
The VARILIGHT Ballast Dimmer, like all our products, is designed to meet the latest European Safety Legislation.
This dimmerswitch is designed for high frequency dimmable ballasts that require a 0-10V or 1-10V control signal.
This dimmer is designed to work with one dimmable ballast, but will give satisfactory results for two ballasts in some circumstances, i.e. Suitable for: 1 or 2, 0.2mA dimmable ballast (e.g. Philips HF-R) or 1, 0.5mA dimmable ballast (e.g. GE LFL UltraMax).
Do not use this dimmerswitch for any other purpose or connect this dimmer to the mains, as your guarantee will be invalid.
Please see Varilight's recommendation of maximum loads in the Compatibility guide PDF found in "Specs & PDF's"
The Freestyle Series is a mini range.
The Freestyle Range allows the creation of individual designs. To create the design, simply remove the clear front plate carefully by gently pulling two of the raised clips on adjacent sides of the clear frame around the product, to allow the clear front plate to be lifted out. There are now a few options: Lift out the printed card, turn it over, this can be drawn on. Alternatively, use the printed card as a template to create desired design, or cut photos, wallpaper or print anything from the internet (Be Creative!)
It may be easier to to draw around the clear faceplate on the back of the selected design, and then cut with scissors or a craft knife on a suitable surface.
Lastly put the design in place, on the product, and clip the the clear front plate back into the clear frame to secure.
-For Dimmable Ballasts that Require 0-10V or 1-10V Control Signal
-Do Not Use This Dimmer For Any Other Purpose
-Fits in a 35mm Deep Wall Box
-Current From 1-10V Control Signal Should Not Be More Than 0.5mA
-Create your own designs, be creative, email us your design, and the best of the best, will get a prize!
-To clean product we recommend only using a microfibre cloth.
-Ballast Dimmer PDF
-Screwless Fitting PDF
-Compatibility 2013 PDF