Varilight V-Pro High Power Series 2 Gang 10-300W Trailing Edge LED Dimmer

#JFBDP602
GTIN: 5021575003727
Product Overview
JFBDP602 Varilight V-Pro High Power Double 1 or 2 way 2x300 watt/30 LEDs push-on/off Rotary LED Dimmer on a Double Plate, Ultra Flat Brushed Brass Plate and Polished Brass Knobs
£63.67  (ex. VAT)
£57.30 (ex. VAT)
£68.76 (inc. VAT)
Earn 64 Reward Points when you buy this item
Quantity  
Free Delivery on all orders over 100 GBP



  •    Description
  •    Specs
  •    Reviews
  •    Q & A (0)
  •    Shipping & Returns
Varilight V-Pro High Power Series 2 Gang, for either 1 or 2 Way circuits, 2x10-300 Watt Push On/Off Rotary LED Trailing Edge Dimmer, on a Double Plate, for max 30 most good quality LEDs. The dimmer has special software with the ability to adjust the minimum brightness, and change the driving mode to Leading Edge.

..................................................
VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
..................................................
The VARILIGHT V-Pro Series Dimmer, like all our products, is designed to meet the latest European Safety Legislation.
..................................................
It is important to select the correct dimmer switch for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us.
..................................................

Appearance, Function and Applications

This dimmer is push on/off and rotary controlled, meaning to turn the dimmer on or off simply push the dimmer knob in and it will click back out; then to turn the brightness up or down, rotate the knob clockwise and anti-clockwise.
..................................................
V-Pro Push on/off dimmers are suitable for either 1 way or 2 way circuits.
..................................................
The V-Pro Series are programmable intelligent dimmers with a choice of dimming modes for wider compatibility. All V-Pro dimmers offer superior dimming technology to deliver the best possible dimming performance for numerous applications.
..................................................
V-Pro Series dimmer switches are trailing edge by default, Mode 1, this versatile mode is suitable for most dimmable LEDs and is also gentler on the load. Some types of dimmable LED perform best with Leading-Edge control, Mode 2 on the dimmer. Mode 3 is suitable for some external LED drivers. The driving modes can be easily changed by following the instructions under 'Programming' as shown in the dimmer instructions manual.
..................................................
Some LEDs are set to a default minimum brightness which may be too bright, the dimmer can be easily adjusted so the minimum brightness of the LED is to your own desired setting.
..................................................
The V-Pro Series were primarily designed for Dimmable LEDs, the dimmers, with a minimum load of 10 Watts and maximum load of 300 watts, can operate at least 1-30 of the majority of quality dimmable LEDs on the market, it works especially well with the manufacturers, Megaman, and Mark Lighting. They are also suitable for halogen and incandescent lighting, most dimmable electronic transformers, with no minimum load, especially Varilight's transformers and are suitable for dimmable low energy lighting.
..................................................
When using Electronic Low Voltage Transformers we recommend that a maximum of 5 good quality dimmable Electronic Transformers are used (10 if Varilight Transformers) with this dimmer range. Please note: add the watts of the bulbs/lamps if using Varilight Transformers, to determine which wattage of dimmer to select, but if using another manufacturer of Transformer, add up the VA of the Transformers so it does not exceed the maximum of the dimmer. Please note that noise levels can depend on the quality of the Transformer being used.
..................................................
The V-Pro Series are equipped with some intelligent features: Soft-Start Technology, allows a longer life span of the bulbs or lamps used by increasing the brightness level softly, which also creates a welcoming effect; Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by either, stepping down the dimmer's output to the lamps (if the watts are marginally overloaded), or the dimmer cuts out before there is any damage, (if the watts are grossly overloaded), until the load is reduced; Intelligent Thermal Protection which again stops damage to the dimmer, if it becomes too hot.
..................................................

2 Way Dimming

The V-Pro Series Push on/off Dimmers can be used in 2 way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2 way switching, they must be paired with a standard '2 way switch' in the other location
3 way switching can be achieved by adding an 'intermediate switch' in to the circuit. When using V-Pro Series Push on/off Dimmers in a 2 or 3 way circuit the lights can only be dimmed from the location that the dimmer is situated in, if total dimming is preferred from many switched locations, in a 2, 3 or more way circuit then choose the Varilight Touch and Remote range of dimmers, in conjunction with Slave Dimmers, like the Multi-Point Remote, or Multi-Point Touch.
..................................................

Limitations

The best dimmer series for dimming Electronic Low Voltage Transformers, including dimming more than 5 Transformers, is the V-Plus Series, which has many features including Overload Protection; Soft Start which is gentler on the load; and Dimmer Buzz Elimination, that can be created from the transformers. V-Plus can NOT dim LEDs.
..................................................
Please note V-Pro Dimmers are not suitable for use with wire-wound low voltage transformers, fans or inductive loads. Please choose the V-Plus Series, which has many features including Overload Protection; Soft Start which is gentler on the load; and Dimmer Buzz Elimination, that can be created from the transformersor alternatively for Fan applications choose V-Dim Solid State Series, please check with manufacturer of appliance to be dimmed.
..................................................
For dimming lighting panels such as LED or CFL, choose the V-Com Series.
..................................................
These Dimmers are not suitable for Triac compatibility LED dimming, for this type of dimming, choose the V-Com Series.
..................................................

Cleaning

This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a 'Gasket' on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty.
..................................................

Product Instructions & Manuals


- V-Pro High Power Dimmer Instructions PDF
- V-Pro Dimmer Series Compatibility Guide PDF
- Compatibility Detailed PDF
- Compatibility Overview PDF
- Screwless Fitting PDF

Product Features


✔V-Pro High Power intelligent dimming technology
✔Trailing Edge for dimming Mains Halogen, Incandescent bulbs and LEDs
✔Dims most good quality LEDs, like Megaman or Mark Lighting
✔Choice of dimming modes for wider compatibility
✔Can be easily adjusted to change the minimum brightness of LEDs
✔Soft start feature and intelligent overload protection
✔Max Load LEDs = 300 watts, Halogen = 500 watt
✔Min Load of 10 watt
✔Max 10 Lamps for all Lighting Types
✔Contemporary, ultra-slim faceplate
✔Fits in a 25mm Deep Wall Box
..................................................

Range: Ultra Flat

Finish: Brushed Brass

Product Category: V-Pro Dimmer

Insert/Knob Colour: Polished Brass Knobs

Dimensions: 89x149x45mm

Faceplate Depth: 1mm

Product Weight: 370g

Fixing Centres: 120.6mm

Recommended Back Box Depth: 35mm

Operating Voltage: 220/250V AC

Maximum Load Rating: LED; 300W (Halogen 500W)

Maximum Current Rating: 2.2A

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm


..................................................

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1

There are currently no any reviews about this product.

There are currently no any question about this product.

WHERE IS MY ORDER SENT FROM?

All orders are packed & shipped from our HQ in West Sussex the same day you order, if in stock and ordered before 12pm GMT Monday to Friday. That's just how we like to roll!



Customers who bought this product also purchased...

Ask a question about the Varilight V-Pro High Power Series 2 Gang 10-300W Trailing Edge LED Dimmer





top ↑