1 Gang (Single) 1 or 2 Way Dimmer Designed Only for High Frequency Dimmable Ballasts that Require a 0-10V (or 1-10V) Control Signal, Ultra Flat Polished Chrome. This product is Bespoke, it is non-returnable unless faulty, as this product is hand made to order.
Varilight 1 Gang (Single) 1 or 2 Way Dimmer Designed Only for High Frequency Dimmable Ballasts that Require a 0-10V (or 1-10V) Control Signal, and should not be more than 0.5mA. For best results 1 dimmer per dimmable ballast, but this dimmer will give satisfactory results for 2 ballasts in some circumstances, see more info, for extra advice. Ultra Flat Polished ChromeVARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
The VARILIGHT Ballast Dimmer, like all our products, is designed to meet the latest European Safety Legislation.
This dimmerswitch is designed for high frequency dimmable ballasts that require a 0-10V or 1-10V control signal.
This dimmer is designed to work with one dimmable ballast, but will give satisfactory results for two ballasts in some circumstances, i.e. Suitable for: 1 or 2, 0.2mA dimmable ballast (e.g. Philips HF-R) or 1, 0.5mA dimmable ballast (e.g. GE LFL UltraMax).
Do not use this dimmerswitch for any other purpose or connect this dimmer to the mains, as your guarantee will be invalid.
Please see Varilight's recommendation of maximum loads in the Compatibility guide PDF found in "Specs & PDF's"
-For Dimmable Ballasts that Require 0-10V or 1-10V Control Signal
-Do Not Use This Dimmer For Any Other Purpose
-Fits in a 35mm Deep Wall Box
-Current From 1-10V Control Signal Should Not Be More Than 0.5mA
-This product is a bespoke product, so can only be returned if faulty.
-To clean product we recommend only using a microfibre cloth.
-Ballast Dimmer PDF
-Compatibility 2013 PDF