Varilight V-Pro IR Series 1 Gang 0-100 Watts Master Trailing Edge LED Dimmer Screwless Polished Chrome
Varilight V-Pro IR Series 1 Gang 0-100 Watts Master Trailing Edge LED Dimmer Screwless Polished Chrome
Varilight V-Pro IR Series 1 Gang 0-100 Watts Master Trailing Edge LED Dimmer Screwless Polished Chrome
Varilight V-Pro IR Series 1 Gang 0-100 Watts Master Trailing Edge LED Dimmer Screwless Polished Chrome

Varilight V-Pro IR Series 1 Gang 0-100 Watts Master Trailing Edge LED Dimmer Screwless Polished Chrome

  • #IJDCI101S
  • GTIN: 5021575101973
£22.92 (ex. VAT)
£27.50 (inc. VAT)
IJDCI101S Varilight V-Pro IR Single Multi way 100 watt Intelligent Programmable Master Dimmer with Touch Sensitive Button and Centralised Remote Control Sensor on a Single Plate, Dimension Screwless Polished Chrome Plate and Chrome Button
More info
Earn 23 Reward Points when you buy this item
Description
Varilight V-Pro IR Series 1 Gang for either 1 way (or 2 way and multi-way when using V-Pro IR Slaves) 0-100 Watt Trailing Edge Dimmer, on a Single Plate, with Touch Sensitive Button and Centralised Remote Control Sensor. The dimmer has special software with the ability to adjust the minimum brightness, and change driving mode to Leading Edge for LEDs.

..................................................
VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
..................................................
The VARILIGHT V-Pro IR Series Dimmer, like all our products, is designed to meet the latest European Safety Legislation.
..................................................
It is important to select the correct dimmer switch for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us.
..................................................

Appearance, Function and Applications

This dimmer is touch sensitive and remote controlled, meaning to operate it without a remote control, with a quick touch of the circular disc turns the dimmer on or off, whilst a longer touch makes the brightness increase or decrease. For touch control, the dimmer works on skin resistance. When using the remote control, aim at the infra red dimmer, with similar technique to touching. Once a button is assigned on the remote to work the dimmer (as shown in the Remote Handset instruction manual) a quick touch of a button and the dimmer turns on and off; Whilst a long touch increases and decreases the brightness.
..................................................
This dimmer is a Master dimmer. One Master dimmer is required per circuit and if the circuit is 2 or more way, then V-Pro IR Slave dimmers must be used for the additional switch/dimmer locations, as normal on/off (rocker or impulse) switches cannot be used in conjunction with this type of dimmer. All our dimmers have the newest software that's available, whenever Varilight creates an update, they update the software in our dimmer stocks too.
..................................................
The VARILIGHT V-Pro IR Touch and Remote Dimmer Series has been designed to dim a range of different fittings:

- Most good quality dimmable LEDs
- Mains voltage incandescent GLS or candle-shaped bulbs
- Good quality dimmable electronic Low Voltage Transformers, including those requiring trailing edge control
- GU10 or similar good quality mains and Eco halogen bulbs
..................................................


Summary of V-Pro IR Compatibility (Per Dimmer Module)

All Dimmers
- 10 dimmable LED lamps (maximum of 100W)
- 100 Watts max of Incandescent lamps
- 100 Watts max of mains, Eco and low voltage halogen lamps
- 100 Watts max of Low Voltage LED [use default mode 1 only]
- Upto 8 dimmable CFLS [use mode 3 only]
..................................................

V-Pro IR Series dimmer switches are trailing edge by default, Mode 1, this versatile mode is suitable for most dimmable LEDs and is also gentler on the load. Some types of dimmable LED perform best with leading-edge control, Mode 2. Mode 3 is suitable for some external LED drivers. The driving modes can be easily changed by following the instructions under Programming as shown in the dimmer instructions manual.
..................................................
Some LEDs are set to a default minimum brightness which may be too bright, the dimmer can be easily adjusted so the minimum brightness of the LED is to your own desired setting.
..................................................
The V-Pro IR Dimmer Series features scene setting and zonal lighting which can be operated by a Universal Remote handset, such as Varilight's YRE8.
..................................................
The V-Pro IR Series were primarily designed for Dimmable LEDs, the dimmers, with a minimum load of 0 Watts and maximum load of 100 watts, can operate at least 1-10 of the majority of quality dimmable LEDs on the market, it works especially well with the manufacturers, Megaman, and Mark Lighting. They are also suitable for halogen and incandescent lighting, most dimmable electronic transformers, with no minimum load, especially Varilight's transformers and are suitable for dimmable low energy lighting.
..................................................

Limitations

Varilight Dimmers can NOT be used for wire-wound or torroidal Transformers. For Fan applications choose V-Dim Solid State Series, please check with manufacturer of appliance to be dimmed.
..................................................
Some 'dimmable' LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix (GLOWfix) load regulator per circuit, also known as YAGF-P.
..................................................
Please choose the V-Pro Series to work with more than 10 LEDs (look for High Power V-Pro models) or V-Com Series which can also dim more than 10 LEDs in a circuit, and is especially good and for dimming lighting panels such as LED or CFL. We have some other LED dimmers that may be of interest, Multi-Point Remote, or Multi-Point Touch.
..................................................

Cleaning

This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a 'Gasket' on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty.
..................................................

Product Instructions & Manuals


- IJ Remote PDF
- V-Pro IR Dimmer Series Compatibility Guide PDF
- Compatibility Detailed PDF
- Compatibility Overview PDF
- Screwless Fitting PDF
Specs

Product Features


✔ V-Pro IR intelligent dimming technology
✔ Trailing Edge for dimming most good quality LEDs
✔ Skin Resistance Touch sensitive button for perfect dimming functionality
✔ Also controlled by infra-red remote handset
✔ Enhanced dimmer for most good quality dimmable LEDs
✔ Improved software enabling zone lighting and scene setting
✔ Self re-setting Overload Protection
✔ Can be used with Varilight V-Pro IR Slave dimmers for 2+ way circuits
✔ Soft start technology allows a longer lifespan of lamps
✔ Minimum brightness can be adjusted easily
✔ Multiple dimming modes that are easily changeable
✔ Max load 100 watts, LED Max load 100 watt
✔ Min Load 0 Watt
✔ Sleek, low-profile screwless faceplate
✔ Fits in a 35mm Deep Wall Box
..................................................

Range: Screwless

Finish: Polished Chrome

Product Category: V-Pro IR Dimmer

Insert/Knob Colour: Chrome Button

Dimensions: 86x86x30mm

Faceplate Depth: 4mm

Product Weight: 140g

Fixing Centres: 60.3mm

Recommended Back Box Depth: 35mm

Operating Voltage: 220/250V AC

Maximum Load Rating: LED: 100W (Halogen: 100W)

Maximum Current Rating: 1.3A

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²


..................................................

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Note: Some LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix load regulator per circuit (part number YAGF-P).

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1

Shipping & Returns
WHERE IS MY ORDER SENT FROM?

All orders are packed & shipped from our HQ in West Sussex the same day you order, if in stock and ordered before 12pm GMT Monday to Friday. That's just how we like to roll!

(0)
(0)
(0)
(0)
(0)

There are currently no any reviews about this product.

asked by Trevor Savager on July 30, 2018

This switch is to control 11 5W LED Downlights is it compatible. If not do you have any suitable similar switches Thank you

Staff answered:

Hi there, thanks for your message.

Please note, this dimmer is not compatible with more than 10 LED lamps, regardless of the wattage. Unfortunately Varilight do not currently produce a touch remote dimmer that is compatible with more than 10 dimmable LEDs, so we recommend the high powered V-Pro rotary dimmer instead - JDCP601S.


asked by Mark Perrett on July 06, 2016

Does this light switch come with the remote control ?

Staff answered:

Thanks for your message. Please note the remote control must be ordered separately for all IR dimmer switches.


asked by Ray Silver on December 02, 2018

Does this dimmer have the illuminated halo around the button.

Staff answered:

No, that was only on the Eclique 1, these have now been replaced with Multi Point Dimmers, although the MP's do not have the blue halo