Varilight V-Pro Series 1 Gang 0-120W Trailing Edge LED Dimmer Screwless Antimicrobial/Antiviral Unlaquered Copper Cu29
#JDYP401S.AC
GTIN: 5021575446067
Plate Finish | Antimicrobial Copper CU29 |
---|---|
Switch Type | Matrix Plates |
Dimmer Features | Trailing Edge, Soft Start Feature, Overload Protection |
Dimmer Gangs | 1 Gang Dimmer |
Dimmer Circuits | 2 Way |
Product Features
✔ V-Pro intelligent dimming technology
✔ Trailing Edge for dimming Mains Halogen, Incandescent bulbs and LEDs
✔ Dims most good quality LEDs, like Megaman or Mark Lighting
✔ Choice of dimming modes for wider compatibility
✔ Can be easily adjusted to change the minimum brightness of LEDs
✔ Soft start feature and intelligent overload protection
✔ Max Load LEDs = 120 watts, Halogen = 120 watt, Mixed Loads = 100 watt
✔ Min Load of 0 watt
✔ Max 10 Lamps for all Lighting Types
✔ Sleek, low-profile screwless faceplate
✔ Fits in a 35mm Deep Wall Box
✔ Anti-microbial copper achieves 99.9% reduction in bacteria within minutes of exposure
✔ These products are Anti-Microbial Unlaquered Copper, therefore they tarnish as expected
..................................................
Range: Screwless
Finish: Antimicrobial/Antiviral Un-Lacquered Copper Cu29
Product Category: V-Pro Dimmer
Insert/Knob Colour: Antimicrobial/Antiviral Copper Knob
Dimensions: 86x86x48mm
Faceplate Depth: 4mm
Product Weight: 170g
Fixing Centres: 60.3mm
Recommended Back Box Depth: 35mm
Operating Voltage: 220/250V AC
Maximum Load Rating: LED: 120W (Halogen = 120 watt, Mixed Loads = 100 watt) (Max. 10 lamps for all lighting types)
Maximum Current Rating: 1.3A
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²
..................................................
Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.
Applicable Safety Standard: BS EN 60669-2-1