XBFIB Varilight Fan Isolating 10 Amp Triple Pole Switch Classic Brushed Brass Effect with Black Switch

XBFIB Varilight Fan Isolating 10 Amp Triple Pole Switch Classic Brushed Brass Effect with Black Switch

XTFIB Varilight Fan Isolating 10 Amp Triple Pole Switch Classic Brushed Steel with Black Switch

XTFIB Varilight Fan Isolating 10 Amp Triple Pole Switch Classic Brushed Steel with Black Switch

XBFIW Varilight Fan Isolating 10 Amp Triple Pole Switch Classic Brushed Brass Effect with White Switch

#XBFIW
GTIN: 5021575012286

£11.64 £9.70
XBFIW Varilight Single 10 Amp Fan Isolating Switch on a Single Plate, a necessity for all bathrooms and shower rooms containing a fan, Classic Brushed Brass Bevelled Edge Plate and White Switch

✔ Triple pole switching
✔ Wide rocker for easy operation
✔ Bevelled edge faceplate
Availability: In stock
SKU
XBFIW
Varilight 1 Gang, 10 Amp Triple Pole Fan Isolating Switch, on a Single Plate, an essential switch used to isolate the electrics of an extractor fan.

..................................................
VARILIGHT switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
..................................................
The Varilight switch, like all our products, is designed to meet the latest European Safety Legislation.
..................................................
It is important to select the correct switch for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us.
..................................................

Appearance, Function and Applications

The triple pole Fan Isolator can be used in most rooms, although wet areas should be avoided, like bathrooms and shower rooms. In wet rooms, the Fan Isolator is put outside of the room. The role of the Fan Isolator, is to isolate the electrics to an extractor fan, so it can be easily removed for inspection, maintenance and repair. This switch is not only essential as a building requirement on a new build or extension but if installing a new extractor fan, it is wise to wire in a Fan Isolator too.
..................................................

Cleaning

This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty.
..................................................

Product Instructions & Manuals


- Wiring Accessories PDF
More Information
Product Filters 1 Gang
Plate Finish Brushed Brass
Switch Type Fan Isolator
Switch Gangs 1 Gang Switch
Switch Color White
Write Your Own Review
You're reviewing:XBFIW Varilight Fan Isolating 10 Amp Triple Pole Switch Classic Brushed Brass Effect with White Switch

Product Features


✔ Triple pole switching
✔ Wide rocker for easy operation
✔ Bevelled edge faceplate
..................................................

Range: Classic

Finish: Brushed Brass

Product Category: Fan Isolating Switch

Insert/Knob Colour: White Insert

Dimensions: 91x91x23mm

Faceplate Depth: 8mm

Product Weight: 170g

Fixing Centres: 60.3mm

Recommended Back Box Depth: 25mm

Operating Voltage: 220/250V AC

Maximum Load Rating: 10A

Maximum Current Rating: 10A

Terminal (Live) Diameter: 3.3mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²


..................................................

Intended Applications: Indoor Use Only. Domestic power supply.

Safety Advice: Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-1