XO1W-S2W 1 Gang 10 Amp Switch Kilnwood Classic Wood Light Oak with White Switch

1 Gang, for either 1 or 2 way circuits, 10 Amp Varilight rocker switch, on a wooden Single Plate, for all lighting types.

..................................................
The manufacturers of these wood products are a British company who have been designing, manufacturing and distributing electrical wiring accessories for over 25 years, not only for the UK, but internationally too. They understand design is in the detail and so offer a broad range of accessories to compliment any interior.
..................................................
These Wooden Ranges are manufactured from only the best sustainable hardwoods by their skilled craftsmen. They take the environmental responsibility seriously and only source timber from well managed temperate forests and do not use any tropical timbers. Some of the wood products are unfinished (without a finish applied) these darken naturally over time. Other wood ranges have finishes applied to them, for example, Dark Oak and Mahogany. Please remember these are natural products with varying wood grain as every tree is slightly different to one another, which gives an almost bespoke and beautiful quality with artistic uniqueness.
..................................................
To reduce their impact further they heat the workshop with the waste sawdust and shavings reducing massively what would have been sent to landfill.
..................................................
They strive to offer ranges that are more than just out of the box standard! They like to consider that when you purchase one of their products you are fitting a piece of wall furniture, something that contributes to the overall design of the room.
..................................................
This company uses Varilight inserts which have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
..................................................
The Varilight insert inside these products, is designed to meet the latest European Safety Legislation.
..................................................
It is important to select the correct product for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us. The following info is related to the Switch/Socket insert or dimmer module contained within these products

Appearance, Function and Applications

The rocker switch is rectangular with a central fulcrum, press the bottom of the rocker switch to turn on, and the top of the rocker switch to turn off, an audible click will occur when turning on/off the switch.
..................................................
Our standard rocker switches are suitable for controlling mains and low voltage lighting, halogen, incandescent GLS, LEDs and any other lighting that does not require dimming.
..................................................
They are also suitable for either 1 way, or 2 way circuits, i.e. where the same lights are controlled by 2 seperate switches. If the lighting circuit is controlled by three switches, in seperate locations then one of the switches in the circuit must be an Intermediate Switch with four terminals enabling you to link all three switches together.
..................................................

Limitations

Remember to not overtighten this product or the natural wood will crack and warranty will be void.
..................................................
This product is not waterproof and should not be used externally.
..................................................
For heavy duty applications such as controlling water heaters or cookers choose from our Heavy Duty Switches, 20 Amp and 45 Amp.
..................................................
If you need a dimmer to use in conjunction with this product, or instead of, then choose one of the following dimmers: if dimming LEDs choose the V-Pro Series. If dimming mains or incandescent lighting then choose the V-Dim Dimmer Series.
..................................................

Cleaning

This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may discolour or warp. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, from the above or over tightening to the wall, it will void the product warranty.
..................................................

Product Instructions & Manuals


- Wiring Accessories PDF