We Are Open And Operating As Normal.
WHEN YOU SPEND MORE THAN £500 - GET 10% OFF
WHEN YOU SPEND MORE THAN £1000 - GET 15% OFF
AND WHEN YOU SPEND MORE THAN £1500 - GET 20% OFF
MySwitchShop
+44(0)1293 851194  or  tel+44(0)1293851157
Varilight V-Pro Multi Point Remote (MPR or Eclique2) Series 1 Gang 0-100 Watts Multi Point Remote Master LED Dimmer Screwless White Chocolate Effect Finish
Varilight V-Pro Multi Point Remote (MPR or Eclique2) Series 1 Gang 0-100 Watts Multi Point Remote Master LED Dimmer Screwless White Chocolate Effect Finish
Varilight V-Pro Multi Point Remote (MPR or Eclique2) Series 1 Gang 0-100 Watts Multi Point Remote Master LED Dimmer Screwless White Chocolate Effect Finish
Varilight V-Pro Multi Point Remote (MPR or Eclique2) Series 1 Gang 0-100 Watts Multi Point Remote Master LED Dimmer Screwless White Chocolate Effect Finish

Varilight V-Pro Multi Point Remote (MPR or Eclique2) Series 1 Gang 0-100 Watts Multi Point Remote Master LED Dimmer Screwless White Chocolate Effect Finish

  • #JDWE101S
  • GTIN: 5021575172133
£26.17 (ex. VAT)
£31.40 (inc. VAT)
JDWE101S Varilight V-Pro Multi Point Remote (aka Eclique2) Single Multi way 100 watt/10 LEDs Intelligent Programmable Master LED Dimmer with Rectangular Tactile Touch Button and Integrated Remote Control Sensor on a Single Plate, Dimension Screwless White Chocolate Effect Low Profile Plate and Polished Chrome Button

✔ V-Pro Multi Point Remote intelligent dimming technology
✔ Trailing Edge for dimming Mains Halogen, Incandescent bulbs and LEDs
✔ Tactile touch control or remote control from dedicated handset
✔ Dims most good quality LEDs, like Megaman or Mark Lighting
✔ Choice of dimming modes for wider compatibility
✔ Can be easily adjusted to change the minimum brightness of LEDs
✔ Soft start feature and intelligent overload protection
✔ Max Load LEDs = 100 watts, Halogen = 100 watt
✔ Max Load Incandescent = 100 watts, DigiFlux CFLs = 8
✔ Min Load 0 watt
✔ Max 10 LED Lamps
✔ Add Multi Point Slaves for 2 or more way dimming
✔ Sleek, low-profile screwless faceplate
✔ Fits in a 35mm Deep Wall Box
More info
Invite friends and you'll both get extra points
Earn 26 Reward Points when you buy this item
Description
Varilight V-Pro Multi Point Remote (MPR or Eclique2) Series 1 Gang for either 1 way (or 2 way and multi-way when using Multi Point Slaves) 0-100 Watt Trailing Edge Dimmer, on a Single Plate, with Tactile Touch and Centralised Remote Control Sensor. The dimmer has special software with the ability to adjust the minimum brightness, and change the driving mode to Leading Edge for LEDs.

..................................................
VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.
..................................................
The VARILIGHT Multi Point Remote (MPR) Series Dimmer, like all our products, is designed to meet the latest European Safety Legislation.
..................................................
It is important to select the correct dimmer switch for your application, so please read the following information carefully, if need be look at PDF manuals, and if you are still unsure, then contact us.
..................................................

Appearance and Function

The MPR Dimmer resembles a normal rocker switch. To dim your lights, press and hold the lower part of the dimmer button and to brighten, press and hold the top of the button. A quick touch will turn the lights on or off. There are also various scene settings that can be changed to suit your environment. A double touch on the lower part of the dimmer button for example, will set the dimmer into scene setting 4 (mid-low brightness), or a double touch to the top half of the button will set the dimmer to full brightness. Please see the product instructions for further info.

MPR Dimmers are used together with Multi Point (MP) Slaves to create dimming versatility for 2 or more way dimming of circuit.
..................................................
The VARILIGHT Multi Point Touch and Remote Dimmer Series has been designed to dim a range of different fittings:

- Most good quality dimmable LEDs
- Mains voltage incandescent GLS or candle-shaped bulbs
- Good quality dimmable electronic Low Voltage Transformers, including those requiring trailing edge control
- GU10 or similar good quality mains and Eco halogen bulbs
- Varilight's Dimmer Dimmable Digiflux CFL's
..................................................


Summary of Multi Point Remote Compatibility (Per Dimmer Module)

All Dimmers
- 10 dimmable LED lamps (maximum of 100W)
- 100 Watts max of Incandescent lamps
- 100 Watts max of mains, Eco and low voltage halogen lamps
- 8 dimmable Digiflux CFLs


..................................................

Applications

This Multi Point Master dimmer alone, or alongside it's Multi Point Slave, can be used in many applications, from Home to commercial premises such as Offices, Bars, Nightclubs, Retirement and Nursing Homes

The MPR Series dimmers are also available as Power Grid Modules, this gives versatility to the range so you are able to mix and match Master and Slave dimmers, along with a large variety of other Power Grid switches together on the same plate, to create your own bespoke products.
..................................................

Software

The Multi Point Remote software, is contained in the Master dimmer. In a 2 or multi way circuit, the Slave sends a signal via a link wire to the Master allowing dimming functionality.

Some LEDs are set to a default minimum brightness which may be too bright, the dimmer can be easily adjusted so the minimum brightness of the LED is to your own desired setting.

V-Pro Multi Point Series dimmer switches are trailing edge by default, Mode 1, this versatile mode is suitable for most dimmable LEDs and is also gentler on the load. Some types of dimmable LED perform best with leading-edge control, Mode 2. Mode 3 is suitable for some external LED drivers. The driving modes can be easily changed by following the instructions under Programming as shown in the dimmer instructions manual.

The V-Pro Multi Point Dimmer Series features scene setting and zonal lighting which can be operated by a Universal Remote handset, such as Varilight's YRE8.
..................................................
The V-Pro Multi Point Series were primarily designed for Dimmable LEDs, the dimmers, with a minimum load of 0 Watts and maximum load of 100 watts, can operate at least 1-10 of the majority of quality dimmable LEDs on the market, it works especially well with the manufacturers, Megaman, and Mark Lighting. They are also suitable for halogen and incandescent lighting, most dimmable electronic transformers, with no minimum load, especially Varilight's transformers and are suitable for dimmable low energy lighting.
..................................................

2 Way and Multi Way Dimming

It is possible to use multiple dimmer switches in a single circuit when using the Multi Point range, this is one massive advantage over conventional dimmers. In this instance, the main switch where the live feed is present must be a master dimmer. The second switch, or 3rd switch (intermediate) must then be a slave dimmer. It is not possible to use a slave dimmer switch as a standalone dimmer in a 1 way circuit. Similarly, normal on/off rocker or impulse switches cannot be used in conjunction with MPR dimmers either.
..................................................
For 1 way circuits: 1 MPR Master Dimmer
For 2 way circuits: 1 MPR Master Dimmer and 1 MP Slave dimmer.
For 3 way circuits: 1 MPR Master Dimmer and 2 MP Slave dimmers.
For multi-way circuits: 1 MPR Master Dimmer and as many MP Slave dimmers as is needed.
..................................................

Limitations

Varilight Dimmers can NOT be used for wire-wound or torroidal Transformers. For Fan applications choose V-Dim Solid State Series, please check with manufacturer of appliance to be dimmed.
..................................................
Some 'dimmable' LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix (GLOWfix) load regulator per circuit, also known as YAGF-P.

Please choose the V-Pro Series to work with more than 10 LEDs (look for High Power V-Pro models) or V-Com Series which can also dim more than 10 LEDs in a circuit, the V-Com is especially good and for dimming lighting panels such as LED or CFL.
..................................................

These Dimmers are not suitable for Triac compatibility LED dimming, for this type of dimming, choose the V-Com Series.
..................................................
Cleaning

This product can be easily cleaned with a soft dry micro-fibre cloth. Never apply masking tape or other similar tape to the product. Avoid the use of any cleaning chemicals and always use a Gasket on freshly plastered, painted or damp walls as the plates may tarnish. (Plaster can take up to 6 months to dry out). A Gasket can be made from the packaging the product comes in, or a plastic bag can be cut to stop the plate touching the plaster. Unfortunately, if these Instructions are not followed, and the plate is damaged, it will void the product warranty.

..................................................
Product Instructions & Manuals

- V-Pro MPR Dimmer Instructions PDF
- V-Pro MPR Dimmer Compatibility Guide PDF
- Compatibility Detailed PDF
- Compatibility Overview PDF
- Screwless Fitting PDF
Specs

Product Features


✔ V-Pro Multi Point Remote intelligent dimming technology
✔ Trailing Edge for dimming Mains Halogen, Incandescent bulbs and LEDs
✔ Tactile touch control or remote control from dedicated handset
✔ Dims most good quality LEDs, like Megaman or Mark Lighting
✔ Choice of dimming modes for wider compatibility
✔ Can be easily adjusted to change the minimum brightness of LEDs
✔ Soft start feature and intelligent overload protection
✔ Max Load LEDs = 100 watts, Halogen = 100 watt
✔ Max Load Incandescent = 100 watts, DigiFlux CFLs = 8
✔ Min Load 0 watt
✔ Max 10 LED Lamps
✔ Add Multi Point Slaves for 2 or more way dimming
✔ Sleek, low-profile screwless faceplate
✔ Fits in a 35mm Deep Wall Box
..................................................

Range: Screwless

Finish: White Chocolate Effect

Product Category: V-Pro Multi-Point Remote (formerly Eclique2) Dimmer

Insert/Knob Colour: Polished Chrome Button

Dimensions: 86x86x27mm

Faceplate Depth: 4mm

Product Weight: 140g

Fixing Centres: 60.3mm

Recommended Back Box Depth: 35mm

Operating Voltage: 220/250V AC

Maximum Load Rating: LED: 100W (Halogen: 100W)

Maximum Current Rating: 1.1A

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²


..................................................

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Note: Some LED lamps are not designed for electronic dimmer switches and may remain illuminated even when a dimmer switch is turned off. This can be corrected using one Varilight LEDFix load regulator per circuit (part number YAGF-P).

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1

Shipping



Here are our weekday (Monday to Friday) delivery methods for UK Mainland, Scottish Lowlands, & Wales:

Shipping

Here are our weekday (Monday to Friday) delivery methods for UK Mainland, Scottish Lowlands, & Wales:

Royal Mail 1st Class 1-4 Days delivery (depending on location), this is dependent on weight:

Up to 100g only £1.50 (For Dimmer modules and other products under 100g that fit in to a Large Letter Pack)
Up to 1kg for only £3.85
More than 1kg is now sent with our courier DPD Local, as the postal charges are too high.

DPD Local Courier:
DPD Local Next Working Day delivery which gives you a 1 hour window for delivery only £7.50

DPD Local Next Working Day delivery before 12pm is only £30

DPD Local Next Working Day delivery before 10:30am at only £35

Here are our weekend (Saturday & Sunday) delivery methods for UK Mainland, Scottish Lowlands & Wales:ç DPD Local Saturday delivery before 5pm only £35

DPD Local Saturday delivery before 12pm is £42.50

DPD Local Saturday delivery before 10:30am is £55

DPD Local Sunday delivery before 5pm only £35

DPD Local Sunday delivery before 12pm is £44

Please remember, the MySwitchShop office is closed at the weekend, so if you require a Saturday or Sunday delivery, please make sure you place your order on any day in the week before noon on Friday.
Occasionally Royal Mail delivers on a Saturday, but this is not a guaranteed service.

Please note: DPD Local may deliver up until 7pm, although if your order is being delivered to a business address, they will do their best for it to be delivered before 5pm.

If customers choose DPD Local as their courier option, their order will be delivered within a 1 hour delivery window the following day. This service also allows the customer to change delivery time or even date, and also where to deliver the item to, via an automated email and text message from DPD Local directly. This service also includes, ‘Follow My Parcel’, which enables you to view the progress of your parcel on a map. DPD Local also supplies a notification when their driver is just 15 minutes away! DPD also have their own app, which can give you better control of your package delivery.

Delivery is free with DPD Local Next Working Day service for UK Mainland, Scottish Lowlands & Wales, if you spend £100 or more per order.

Please note if you need your order in a hurry, you are best to choose the DPD Local Next Day or Timed Delivery option at checkout, as 1st Class Royal Mail delivery is not a guaranteed next day delivery service.

(Note: We are in the process of adding more UK and international delivery options which will be available very shortly).

Here are our weekday (Monday to Friday) delivery methods for the rest of the UK, including Scottish Highlands & Islands, Scilly Isles, Isle of Man & Channel Islands:

Royal Mail 1st Class usually 1-4 Days delivery, but might take longer depending on your location this is dependent on weight:

Up to 100g only £1.50
Up to 1kg for only £3.85
Up to 1kg to ROI/Eire only £12

DPD Local Next Day To Channel Islands is £25.
DPD Local 2 Days Delivery To Isle Of Man is £27.
DPD Local Next Day Delivery To Isle Of Wight is £20.
DPD Local Next Day Delivery To Scilly Isles is £38.
DPD Local 2 Day Delivery To Northern Ireland is £28.
DPD Local 2 Days Delivery To Rest Of Eire is £28.
DPD Local 2 Days Delivery To Scottish Highlands is £19.50.
DPD Local 2 Days Delivery To Scottish Offshore is £19.50.

(DPD Local are usually a Next Day Service, but may take an extra day depending on your location).

We can now offer delivery for the same day. For this service please ring us on 01293 851194 or 851157, where we can provide a quote for you.

Please see our Terms and Conditions, for more information on delivery costs, etc.
Returns
RETURNS

Should you need to return any products please click HERE to download our returns form.

IF RETURNING PRODUCTS THAT ARE FAULTY:



We accept goods that are faulty for a period of 1 year providing the following:

Please contact us and we will generate a returns number and postage paid document that you can stick to your parcel. Make sure you make it clear on the returns form if you want a replacement or refund. Please note using this method ensures that you won't have to pay for return delivery. If you decide to choose to send it back by another method, we can NOT refund this return delivery cost to you. You can also contact us if you have an account, simply log in and go to the correct order relating to your return and follow the instructions and email us directly from there. The quickest way to receive a replacement, is to buy the product you need on-line, so we can send it to you immediately. If the product is faulty and still on the wall/ or in its position and is unsafe to remove, please wait for the replacement to arrive, and swap these products over, sending us back the faulty product.

Please make sure the product(s) are well packaged so will not damage in the post. Return the goods to the address shown below. Please enclose a completed copy of our returns form, which can be downloaded by clicking HERE. We will credit your card/Paypal after we have received your goods and will send you a refund note for your records.

When returning faulty products for replacement only, please write on returning parcel "REPLACEMENT", this will ensure a quicker turn around. Please fill in all of the required fields on the returns form, as this will greatly reduce the time taken to process your return. If you do not wish to place a new order to receive a replacement, please send back the faulty item to us with a completed returns form, asking for a replacement to be sent to you or a refund to be made. Please note this method can take longer to process. Please also remember to retain your proof of posting.



Special "Bespoke" items CAN be returned if they are faulty, but not refunded, because you will be entitled for a free repair by myswitchshop if they develop a fault, within Varilight's 10 year warrenty period.



IF RETURNING PRODUCTS THAT ARE NOT REQUIRED:



We accept goods that are unwanted for a period of 28 days providing the following:

All products returned for exchange or refund due to them not being required must have NOT been fitted, be in their original packaging, include all accessories and instructions and be in a resalable condition. Unwanted products must be sent back within 28 days of you receiving the original order in order to obtain a refund or exchange.

We suggest either sending back with recorded delivery or courier, your return delivery cost will not be refunded. The quickest way to receive a different product, is to buy the product you need on-line, so we can send it to you immediately. Please make sure the product(s) are well packaged so will not damage in the post.

Return the goods to the address shown below. Please enclose a completed copy of our returns form, which can be downloaded by clicking HERE. We will credit your card after we have received your goods and will send you a credit note for your records. Please fill in all of the required fields on the returns form, as this will greatly reduce the time taken to process your return.

If you do not wish to place a new order to receive a different product, please send back the unwanted item to us within 28 days, with a completed returns form, asking for a different product to be sent to you or a refund to be made. Please note this method can take longer to process. Please also remember to retain your proof of posting.



Special "Bespoke" items cannot be returned if they are unwanted. They can however be sent back for a free repair by myswitchshop if they develop a fault, within Varilight's 10 year warranty period.



If you have any further queries regarding returns please contact us at enquiries@myswitchshop.com or alternatively call us on 01293 851194 or 01293 851157.



Send To-


My Switch Shop
1Stop Electrics Group LTD
(1Stop Electrics LLP)
Carylls Lea
Faygate Lane
Faygate
Horsham
West Sussex
RH12 4SJ



If MySwitchShop does not receive these items in the given time [See above], or at all [See Delivery Terms], MySwitchShop cannot reimburse any monies.



Calls are charged at national rate. Lines are open 9:30am - 4.45pm weekdays only. (But there is an answer machine for any enquiries out of normal office hours).

MySwitchShop would like to thank you for placing your order with us!