JESP401S Varilight European V-Pro Series (Best For Dimming Dimmable LED\'s) 1 Gang (Single), 1 or 2 Way 400 Watt (Trailing Edge) Dimmer, Dimension Screwless Brushed Steel

JESP401S Varilight European V-Pro Series (Best For Dimming Dimmable LED's) 1 Gang (Single), 1 or 2 Way 400 Watt (Trailing Edge) Dimmer, Dimension Screwless Brushed Steel

#JESP401S
£19.58 (ex. VAT)
£23.50 (inc. VAT)
Quantity  
Free Delivery on all orders over 100 GBP



  •    Description
  •    Reviews
  •    Q & A (0)
  •    Shipping & Returns
MADE TO ORDER - PLEASE ALLOW UP TO 4 WEEKS FOR THIS PRODUCT TO BE DESPATCHED.

European 1 Gang (Single), 1 or 2 Way 400 Watt (Trailing Edge) Dimmer, Dimension Screwless Brushed Steel Varilight European V-Pro Series Dimension Screwless Brushed Steel, 1 Gang (Single), 1 or 2 Way 400 Watt Push on/Push off (Trailing Edge, but this can now be adjusted to Leading Edge.) Dimmer with Brushed Steel Knob. Eliminate Dimmer Buzz. For Most Dimmable LED's, GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge LoadsVARILIGHT European Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices.

The VARILIGHT V-Pro (Professional Universal) Series Dimmer (also known as the J Dimmer), like all our products, is designed to meet the latest European Safety Legislation. (Harmonised Standard: EN60669).

The V-Pro Series, eliminates Dimmer Buzz For GLS Bulbs, GU10 Lamps, and LV Transformers Including Trailing Edge Loads and is equipped with Self Re-setting Overload Protection, so is able to handle overload situations, for example, if the wattage of the bulbs/lamps are accidentally too high on a circuit. This is achieved by either, stepping down the dimmer's output to the lamps (if the watts are marginally overloaded), or the dimmer cuts out before there is any damage, (if the watts are grossly overloaded), until the load is reduced. The dimmer also contains a heat sensor which again stops damage to the dimmer, if it becomes too hot.

The V-Pro Series Dimmer has Soft Start Technology, allowing a longer life span of the bulbs or lamps used by increasing the brightness level softly, which also creates a welcoming effect.

The V-Pro Series were primarily designed for Dimmable LED's, the dimmers, with a minimum load of only 10 Watts, can operate at least 1-20 good quality Dimmable LED's, it works especially well with the manufacturers, Philips and Toshiba.

These Dimmers can also be used to operate upto 12 Varilight (YCA20D) or Megaman Dimmable Energy Saving Lamps, (Please refer to the instruction leaflet of the Megaman lamps for usage tips).

The V-Pro Series Dimmers can also be used for Mains Voltage Lighting, Trailing Edge Loads, and Electronic Low Voltage Transformers. When using Electronic Low Voltage transformers we recommend that a maximum of 5 good quality dimmable electronic transformers are used (10 if Varilight) with this Dimmer range. Please note: add the watts of the bulbs/lamps if using Varilight Transformers, to determine which dimmer to select, but if using another manufacturer of transformer, add up the VA of the transformers so it does not exceed the maximum of the dimmer.

The V-Pro Series Dimmers can also be used for mains incandescent GLS lamps (standard mains light bulbs), GU10 Lamps or similar Hi Spot Mains Halogen lamps, (only use quality UK supplied lamps), up to the maximum load as specified on the dimmer.



The V-Pro Series Dimmer can NOT be used for wire-wound Low Voltage transformers, Fans or inductive loads.

The V-Pro Series uses Trailing edge technology.

These Dimmers can be used in 2-way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2-way switching, they must be paired with a standard 2-way switch in the other location. 3-way switching can also be achieved by adding an intermediate switch in to the circuit. Please note, if total dimming is preferred from all switched locations, in a 2 or 3-way circuit then choose the Varilight Touch and Remote Series range of dimmers, in conjunction with Slave Dimmers.

This Dimmer has a maximum of 400 Watts and minimum of 10 Watts-Height (mm):86

-Width(mm):86

-5021575161069

-Max Load 400 Watt, LED Max Load 100 Watt

-Min Load 20 Watt

-Fits in a 35mm Deep Square or Round Wall Box

-The Best Dimmer For most Good Quality Dimmable LED's, Like Megaman

-Trailing and Leading Edge Dimmer, refer to instructions provided with the dimmer, to allow switching between the 2 modes.

-To clean product we recommend only using a microfibre cloth.
-V-Pro Push Dimmer Instructions 761 PDF
-Screwless Fitting PDF
-Compatibility 2013 PDF

There are currently no any reviews about this product.

There are currently no any question about this product.

WHERE IS MY ORDER SENT FROM?

All orders are packed & shipped from our HQ in West Sussex the same day you order, if in stock and ordered before 12pm GMT Monday to Friday. That's just how we like to roll!

Customers who bought this product also purchased...
XEST2S Varilight European 2 Gang (Double), 1 or 2 Way 10 Amp Classic Toggle Switch, Dimension Screwless Brushed Steel

XEST2S Varilight European 2 Gang (Double), 1 or 2 Way 10 Amp Classic Toggle Switch, Dimension Screwless Brushed Steel

MADE TO ORDER - PLEASE ALLOW UP TO 4 WEEKS FOR THIS PRODUCT...
£11.25 (ex. VAT)
£13.50 (inc. VAT)
XES4.4.4S (XES444FG) Varilight European 3 Gang (Triple), Euro (Pin Earth) Flush Design Socket, Dimension Screwless Brushed Steel (Triple Plate)

XES4.4.4S (XES444FG) Varilight European 3 Gang (Triple), Euro (Pin Earth) Flush Design Socket, Dimension Screwless Brushed Steel (Triple Plate)

MADE TO ORDER - PLEASE ALLOW UP TO 4 WEEKS FOR THIS PRODUCT...
£25.33 (ex. VAT)
£30.40 (inc. VAT)
XES7S-SP Varilight European 1 Gang (Single), (3 Way) Intermediate 10 Amp Switch, Dimension Screwless Brushed Steel (Bespoke & Special)

XES7S-SP Varilight European 1 Gang (Single), (3 Way) Intermediate 10 Amp Switch, Dimension Screwless Brushed Steel (Bespoke & Special)

MADE TO ORDER - PLEASE ALLOW UP TO 4 WEEKS FOR THIS PRODUCT...
£13.83 (ex. VAT)
£16.60 (inc. VAT)
XESG1S-P Varilight European VariGrid Single faceplate with a 1 hole cut-out, Dimension Screwless Brushed Steel

XESG1S-P Varilight European VariGrid Single faceplate with a 1 hole cut-out, Dimension Screwless Brushed Steel

PLEASE ALLOW 2-3 DAYS FOR THIS PRODUCT TO BE...
£3.83 (ex. VAT)
£4.60 (inc. VAT)
XESG2S-P Varilight European VariGrid Double faceplate with a 2 hole cut-out, Dimension Screwless Brushed Steel

XESG2S-P Varilight European VariGrid Double faceplate with a 2 hole cut-out, Dimension Screwless Brushed Steel

PLEASE ALLOW 2-3 DAYS FOR THIS PRODUCT TO BE...
£7.50 (ex. VAT)
£9.00 (inc. VAT)
XESG3S-P Varilight European VariGrid Triple faceplate with a 3 hole cut-out, Dimension Screwless Brushed Steel

XESG3S-P Varilight European VariGrid Triple faceplate with a 3 hole cut-out, Dimension Screwless Brushed Steel

PLEASE ALLOW 2-3 DAYS FOR THIS PRODUCT TO BE...
£11.00 (ex. VAT)
£13.20 (inc. VAT)

Ask a question about the JESP401S Varilight European V-Pro Series (Best For Dimming Dimmable LED's) 1 Gang (Single), 1 or 2 Way 400 Watt (Trailing Edge) Dimmer, Dimension Screwless Brushed Steel





top ↑