The V-Pro series comprises programmable intelligent dimmers with a choice of dimming modes for wider compatibility. All V-Pro dimmers offer superior dimming technology to deliver the best possible dimming performance for a given load. V-Pro dimmers have a push-on/push-off switch action with rotary dimming. You can change between three driving modes and adjust the minimum brightness to suit your installation.
This dimmer is designed to control LED lighting loads requiring trailing-edge or leading-edge control with options from 0W-120W (max. 10 LEDs)
V-Pro series dimmers are designed for use with LEDs and work with the majority of dimmable LEDs on the market. They are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting.
These Dimmers can be used in 2-way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2-way switching, they must be paired with a standard 2-way switch in the other location. 3-way switching can also be achieved by adding an intermediate switch into the circuit. Please note, if total dimming is preferred from all switched locations, in a 2 or 3-way circuit then choose the Varilight Touch and Remote Series range of dimmers, or the Eclique range (if dimming LEDs) in conjunction with Slave Dimmers. The V-Pro Dimmers have a soft start feature and intelligent overload protection.
These dimmers do not work with lighting panels (LED or CFL).
Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. As a rule, buy the V-Pro dimmers and LEDs from us to make sure they are compatible.
We only sell products that have the latest software installed. our PDF instruction manuals refer to the product that is being sold.
-Fits in a 25mm Deep Wall Box
-Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes. With the V-Pro series, you are, able to adjust the minimum brightness setting.
-The Best Dimmer For Most Good Quality Dimmable LEDs.
-To clean product, we recommend only using a microfibre cloth.
2-Gang 2-Way Push-On/Off Rotary LED Dimmer 2 x 0-120W (1-10 LEDs)
Finish: Duck Egg Blue
Product Category: V-Pro Dimmer
Insert/Knob Colour: Duck Egg Blue Knobs
Faceplate Depth: 7mm
Product Weight: 190g
Fixing Centres: 60.3mm
Recommended Back Box Depth: 25mm
Operating Voltage: 220/250V AC
Maximum Load Rating: LED; 120W (Halogen; 200W, Mixed Loads; 120W) (Max. 10 lamps for all lighting types)
Maximum Current Rating: 0.9A
Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²
Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²Intended Applications:
Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.
Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.
Applicable Safety Standard: BS EN 60669-2-1
There are currently no any reviews about this product.
There are currently no any question about this product.
WHERE IS MY ORDER SENT FROM?
All orders are packed & shipped from our HQ in West Sussex the same day you order, if in stock and ordered before 12pm GMT Monday to Friday. That's just how we like to roll!