Tel: +44(0)1293 851194 or +44(0)1293 851157
0 items at £0.00

Varilight JRDP503, V-Pro Series, 3-Gang 2-Way Push-On/Off Rotary LED Dimmer 3 x 10-250W (Max 30 LEDs) (Twin Plate), Classic Pewter

code: JRDP503

£85.42 (ex. VAT)
£102.50 (inc. VAT)

Quantity:
  • My Switch Shop Free Delivery
  • My Switch Shop Large Quantity
  • My Switch Shop Ask A Question


  • Description
  • Specs
  • Reviews
  • Q&A
  • Delivery & Returns

This dimmer is designed to control LED lighting loads requiring trailing-edge or leading-edge control with options from 10W-300W (max. 30 LEDs)

V-Pro series dimmers are designed for use with LEDs and work with the majority of dimmable LEDs on the market. They are also suitable for halogen and incandescent lighting, most dimmable electronic transformers and with no minimum load, are suitable for dimmable low energy lighting.


These Dimmers can be used in 2-way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2-way switching, they must be paired with a standard 2-way switch in the other location. 3-way switching can also be achieved by adding an intermediate switch into the circuit. Please note, if total dimming is preferred from all switched locations, in a 2 or 3-way circuit then choose the Varilight Touch and Remote Series range of dimmers, or the Eclique range (if dimming LEDs) in conjunction with Slave Dimmers. The V-Pro Dimmers have a soft start feature and intelligent overload protection.

These dimmers do not work with lighting panels (LED or CFL).

Please note that only good quality dimmable LEDs should be used. If this dimmer is purchased and the LED lamps are not compatible, the dimmer is not faulty so cannot be returned, but a better quality LED lamp/bulb should be fitted instead. As a rule, buy the V-Pro dimmers and LEDs from us to make sure they are compatible.

We only sell products that have the latest software installed. our PDF instruction manuals refer to the product that is being sold.

-Fits in a 25mm Deep Wall Box

-Trailing and Leading Edge Dimmer, please refer to instructions provided with the dimmer, which explains all 3 dimming modes. With the V-Pro series, you are, able to adjust the minimum brightness setting.

-The Best Dimmer For Most Good Quality Dimmable LEDs.

-To clean product, we recommend only using a microfibre cloth.
Product Description: 3-Gang 2-Way Push-On/Off Rotary LED Dimmer 3 x 10-250W (Max 30 LEDs) (Twin Plate)


Range: Classic

Finish: Pewter

Product Category: V-Pro Dimmer

Insert/Knob Colour: Chrome Knobs

Barcode: 5021575003321


Dimensions: 91x150x45mm

Faceplate Depth: 8mm

Product Weight: 330g

Fixing Centres: 120.6mm

Recommended Back Box Depth: 25mm

Operating Voltage: 220/250V AC

Maximum Load Rating: LED; 250W (Halogen; 400W)

Maximum Current Rating: 1.7A

Terminal (Live) Diameter: 3.2mm; Capacity: 3 x 1.5mm²

Terminal (Earth) Diameter: 3.3mm; Capacity: 3 x 1.5mm²

Intended Applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs.

Safety Advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, wire-wound or toroidal transformers or electric motors. Do not overload. Product Must Be Earthed.

Applicable Safety Standard: BS EN 60669-2-1

Commodity Code: 85365007

  • Model: JRDP503
  • Shipping Weight: 330grams
  • Manufactured by: Varilight

Be the first to write a review.  Write a Review.

There are currently no any question about this product.

Delivery & returns


Ask a question about the Varilight JRDP503, V-Pro Series, 3-Gang 2-Way Push-On/Off Rotary LED Dimmer 3 x 10-250W (Max 30 LEDs) (Twin Plate), Classic Pewter







Content

Welcome to our new site template.

You can also visit our sister site 1Stop Electrics Here