THESE DIMMERS WILL NOT DIM LEDs.
4 Gang (Quad), 1 or 2 Way 4x250 Watt Dimmer, Dimension Screwless Premium White (Double Plate)
Varilight V-Dim (Standard) Series Dimension Screwless Premium White, 4 Gang (Quad), 1 or 2 Way 4x250 Watt Push on/Push off Standard Dimmer Switch with Polished Chrome Knobs (Double Plate)
VARILIGHT Dimmer Switches have an industry-wide reputation for exceptional performance, long life and innovation at attractive prices. Like all Varilight products these V-Dim (Standard) Series dimmers are designed to meet the latest European Safety Legislation.
It is important to select the correct dimmer switch for your application so please read the following information carefully.
The lights are dimmed by a rotary control knob and turned on and off by a push on/off action. V-Dim Push on/off dimmers are suitable for 1-way and 2-way circuits.
Our V-Dim Series Standard Dimmers are Leading Edge and can be used with mains voltage lighting and good quality Low Voltage Electronic Transformers. When using Electronic Low Voltage Transformers we recommend that a maximum of 5 good quality dimmable Electronic Transformers are used (10 if Varilight) with this Dimmer range. Please note: add the watts of the bulbs/lamps if using Varilight Transformers, to determine which dimmer to select, but if using another manufacturer of Transformer, add up the VA of the Transformers so it does not exceed the maximum of the dimmer. Please note that noise levels can depend on the quality of the Transformer being used. The best suited dimmer series for dimming Electronic Low Voltage Transformers is the V-Pro Series, which has many features including Dimmer Buzz Elimination, that is created from the Transformers. If using 6+ non Varilight Transformers then choose the V-Pro or V-Plus Series.
The V-Dim Series Standard Push on/off Dimmers can be used in 2-way circuits (where one lighting circuit is controlled from two locations). In order to achieve 2-way switching, they must be paired with a standard 2-way switch in the other location. 3-way switching can be achieved by adding an intermediate switch in to the circuit. When using V-Dim Standard Push on/off Dimmers in a 2 or 3-way circuit the lights can only be dimmed from the location that the dimmer is situated in. Please note, if total dimming is preferred from many switched locations, in a 2, 3 or more way circuit then choose the Varilight Touch and Remote range of dimmers, in conjunction with Slave Dimmers.
The V-Dim Series Standard Push on/off Dimmers can be used for mains incandescent GLS lamps (standard mains light bulbs), up to the maximum load as specified on the dimmer. They can also dim GU10 or similar Hi Spot Mains Halogen lamps (only use quality UK supplied lamps) up to the maximum load as specified on dimmer.
Choose V-Pro Dimmer Series if dimming LED's.
The V-Dim Push on/off Series are NOT suitable for use with wire wound Transformers or Fans and other inductive loads (for these products see The V-Plus [Intelligent IQ] Dimmer Series, and Fan Regulating dimmers). Please check with manufacturer of appliance to be dimmed.
This Dimmer has a maximum of 250 Watts and minimum of 40 Watts.
Please see Varilight's recommendation of maximum loads in the Compatibility guide PDF found in "Specs & PDF's"
-Max Load 250 Watt
-Min Load 40 Watt
-Fits in a 35mm Deep Wall Box
-To clean product we recommend only using a microfibre cloth.
-Generic Dimmer Instructions 552 PDF
-Screwless Fitting PDF
-Compatibility 2013 PDF